Actions

Difference between revisions of "Testing Area/Behat Testing/Setup"

From Mahara Wiki

< Testing Area‎ | Behat Testing
 
(46 intermediate revisions by 12 users not shown)
Line 1: Line 1:
=How to install Mahara and Behat=
+
{{note|These instructions for the Behat setup are only for machines running Linux. They will not work for Windows machines.}}
  
'''Note''': These instructions for Mahara and Behat setup are only for machines running Linux. They will not work for Windows machines
+
1. Set up your [[Developer_Area/Developer_Environment | developer environment]] if you haven't already done so.
  
 +
2. Install Behat's dependencies:
 +
<syntaxhighlight lang="bash">
 +
$ sudo apt-get install curl openjdk-8-jre-headless
 +
</syntaxhighlight>
  
 +
3. Add the following config settings to the bottom of your Mahara config.php file inside the htdocs/ subdirectory of the Mahara codebase.
  
== For dev's instructions to install a Mahara ==
+
{{note|If /var/www/maharadata is not where you created your dataroot, you'll need to replace that with the correct path in the following commands}}
Please use [[System_Administrator%27s_Guide/Installing_Mahara]].
 
  
 +
<syntaxhighlight lang="bash">
 +
// Behat config
 +
$cfg->behat_test = true; // Turn this off when you are not behat testing
 +
$cfg->behat_dbprefix = 'behat_'; // must not empty
 +
$cfg->behat_dataroot = "/var/lib/maharadata/main_behat"; // The Behat copy of maharadata.
 +
$cfg->behat_wwwroot = 'http://localhost:8000'; // Must be this
 +
$cfg->behat_selenium2 = "http://127.0.0.1:4444/wd/hub"; // Must be this
  
 +
// If you want failed step screenshots appear directly on screen while the step fails (only Ubuntu)
 +
$cfg->behat_view_screenshots = true;
 +
</syntaxhighlight>
  
== Otherwise, if you do not have Mahara installed ==
+
{{note|There should be a behat_dataroot for each Mahara instance that you set up. Here the one for the main branch / this Mahara instance is created.}}
 +
{{note|If the directory for $cfg->behat_dataroot does not exist then it will need to be created.}}
  
{{note|If you do have Mahara already installed, skip to [[#Behat_installation]]}}
+
4. Make your Behat data directory (check this matches what you set in config.php):
 +
<syntaxhighlight lang="bash">
 +
$ sudo mkdir /var/lib/maharadata/main_behat
 +
</syntaxhighlight>
  
 +
5. Make the directory and any subdirectories writeable by Mahara (check the directory is correct):
 +
<syntaxhighlight lang="bash">
 +
$ sudo chmod 777 -R /var/lib/maharadata/main_behat
 +
</syntaxhighlight>
 +
<span id="chown"></span>
 +
6. Change the directory and any subdirectories permissions to be owned by apache user (check the directory is correct):
 +
<syntaxhighlight lang="bash">
 +
$ sudo chown -R www-data:www-data /var/lib/maharadata/main_behat
 +
</syntaxhighlight>
  
 +
*For Ubuntu, apache runs with user www-data
 +
*For Centos, apache runs with user apache
  
Install Apache, PHP5, Database, Git:
+
7. Run Behat tests (change into your Mahara code directory first) as the apache user:
sudo apt-get install php5 php5-cli php5-pgsql php5-xmlrpc php5-intl php5-curl php5-gd php5-xdebug php5-dbg postgresql apache2 git
+
<syntaxhighlight lang="bash">
 +
$ cd
 +
$ cd code/mahara
 +
./test/behat/mahara_behat.sh run
 +
</syntaxhighlight>
  
Restart Apache
+
Or if you have sudo access:
sudo service apache2 restart
+
<syntaxhighlight lang="bash">
 +
$ cd
 +
$ cd code/mahara
 +
sudo -u www-data ./test/behat/mahara_behat.sh run
 +
</syntaxhighlight>
  
Make a Mahara directory in the same place as Moodle
 
sudo mkdir /var/www/html/mahara
 
  
Then change into the Mahara directory
+
For the first time of running Behat, you need to wait for the Behat environment initialisation. This can take a while.
cd /var/www/html/mahara
 
  
Then change the permission (insert the username of the machine into the username. Don't use the word username)
+
To run all tests:
  sudo chown username:username /var/www/html/mahara
+
  ./test/behat/mahara_behat.sh run
  
Get Mahara clone.
+
To run your specific tests marked with @yourtags:
  git clone https://github.com/MaharaProject/mahara.git .
+
  ./test/behat/mahara_behat.sh run @yourtags
  
Checkout the master(15.04) branch
+
To run a particular feature file:
  git checkout master
+
  ./test/behat/mahara_behat.sh run my_file.feature
  
Note: if this step doesn't work. You may have forgotten the fullstop off the end of the git clone command. It created a mahara directory inside the other mahara directory. Go in to the file explorer and delete the second instance.
+
The run / runheadless / rundebug / rundebugheadless / runfresh are interchangable with run in above commands
  
Become Postgres user:
+
[[Category:Behat]]
sudo su postgres
 
 
 
Open psql. After some preamble you should see the prompt postgres=#.
 
psql
 
 
 
You should now see postgres=# ready and awaiting your command.
 
 
 
Create a user and don't use the PW that you use for your workstation:
 
CREATE USER maharauser WITH PASSWORD 'yourpassword';
 
 
 
As you previously did, you should see postgres=#
 
You are now going to create a database:
 
CREATE DATABASE mahara WITH OWNER maharauser;
 
 
 
Exit to leave psql by pressing Ctrl-D
 
 
 
Exit back to your own user:
 
exit
 
 
 
Make a data directory:
 
sudo mkdir /var/www/maharadata
 
 
 
Make directory writeable by mahara:
 
sudo chmod 777 /var/www/maharadata
 
 
 
 
 
In the code below make sure you change <your email address> to your actual work email address, without the <> signs.
 
 
 
<pre>
 
<?php
 
$cfg = new stdClass();
 
  
$branch = 'master';
+
==Running Behat tests with html report and screenshots on failed steps==
  
// database connection details
+
To run tests with html output, add the flag 'html' to your test run command, e.g:
// valid values for dbtype are 'postgres8' and 'mysql5'
 
$cfg->dbtype  = 'postgres';
 
$cfg->dbhost  = 'localhost';
 
$cfg->dbuser  = 'maharauser';
 
$cfg->dbname  = "mahara";
 
$cfg->dbpass  = 'password';
 
  
$cfg->dataroot = "/var/www/maharadata";
+
<syntaxhighlight lang="bash">./test/behat/mahara_behat.sh run create_page.feature html</syntaxhighlight>
  
$cfg->sendemail = true;
+
This will automatically open an html report of the test run in your browser. If there were failed steps, the the html report plugin takes a screenshot of the page that failed.
$cfg->sendallemailto = '<your email address>';
+
You can find the screenshots in your behat dataroot (usually /var/lib/maharadata/main_behat) at the following path:
 +
behat/html_results/<feature title>/<scenario title>.png
  
$cfg->productionmode = false;
+
Ubuntu only (you need the image viewer '[https://packages.ubuntu.com/search?keywords=eog eog]'): If you set
$cfg->perftofoot = true;
 
</pre>
 
  
 +
$cfg->behat_view_screenshots = true;
  
An example config.php should appear:
+
in your config.php file then the images will be opened up in image browser.
  
* Copy all of the code above
+
Hopefully we will rig up the report to link to the screenshot soon.
* open text editor from start menu
 
* paste code
 
* save file in the directory: /var/www/html/mahara/htdocs/ and call it config.php
 
* save
 
  
 +
==How to Run Mahara behat test on Chrome for versions older than 17.04==
  
 +
{{note|Mahara behat is running on chrome driver by default in 17:04+}}
  
===Behat installation===
+
This is steps for older versions of Mahara
  
Install Behat's dependencies:
+
1. Download chromedriver here http://www.seleniumhq.org/download/ ( download the latest release)
sudo apt-get install curl openjdk-7-jre-headless xvfb
 
  
Make sure you are on the lastest code on master (make sure you are in your Mahara code directory):
+
2. Start selenium Server with chrome driver
git checkout master
 
git pull
 
  
Add these config settings to the bottom of your config.php file.  
+
$ java -jar selenium-server-standalone-2.53.1.jar -Dwebdriver.chrome.driver=path of chromedriver
  
<pre>
+
3. Change the behat.yml file as follows,
// Behat config
 
$cfg->dbprefix = ''; // Behat complains without this
 
$cfg->wwwroot = 'http://127.0.0.1/mahara/htdocs';
 
$cfg->behat_dbprefix = 'behat_'; // must not empty
 
$cfg->behat_dataroot = '/var/www/maharadata/behat';
 
$cfg->behat_wwwroot = 'http://localhost:8000';
 
</pre>
 
  
Make a data directory:
+
Here is the file path var/lib/maharadata/main_behat/behat.yml
sudo mkdir /var/www/maharadata/behat
 
  
Make directory writeable by mahara:
+
when you open the beaht.yml file replace the following code with the lines that contain sessions to go
sudo chmod 777 /var/www/maharadata/behat
 
  
Run Behat tests (change into your Mahara code directory first)
+
javascript_session: selenium2
./test/behat/mahara_behat.sh run
+
        selenium2:
 +
          browser: chrome
 +
            goutte: ~
  
For the first time of running behat, you need to wait for the Behat environment initialisation. This can take a while.
+
4. Run the behat test without rundebug
  
Run your specific test from now on run:
+
for example ./test/behat/mahara_behat.sh run example.feature
Make sure it's saved in the feature folder with the name something.feature and it has tags in it, inc @javascript and then run this line from the mahara directory:
 
Remember cd into Mahara directory first.
 
  ./test/behat/mahara_behat.sh run @yourtags
 
  
 +
==Debugging==
  
[[Category:Behat]]
+
Go here for tips: https://wiki.mahara.org/wiki/Testing/Behat_Testing/Error_%26_Solutions

Latest revision as of 12:21, 15 June 2023

Note: These instructions for the Behat setup are only for machines running Linux. They will not work for Windows machines.

1. Set up your developer environment if you haven't already done so.

2. Install Behat's dependencies:

$ sudo apt-get install curl openjdk-8-jre-headless

3. Add the following config settings to the bottom of your Mahara config.php file inside the htdocs/ subdirectory of the Mahara codebase.

Note: If /var/www/maharadata is not where you created your dataroot, you'll need to replace that with the correct path in the following commands
// Behat config
$cfg->behat_test = true; // Turn this off when you are not behat testing
$cfg->behat_dbprefix = 'behat_'; // must not empty
$cfg->behat_dataroot = "/var/lib/maharadata/main_behat"; // The Behat copy of maharadata.
$cfg->behat_wwwroot = 'http://localhost:8000'; // Must be this
$cfg->behat_selenium2 = "http://127.0.0.1:4444/wd/hub"; // Must be this

// If you want failed step screenshots appear directly on screen while the step fails (only Ubuntu)
$cfg->behat_view_screenshots = true;
Note: There should be a behat_dataroot for each Mahara instance that you set up. Here the one for the main branch / this Mahara instance is created.
Note: If the directory for $cfg->behat_dataroot does not exist then it will need to be created.

4. Make your Behat data directory (check this matches what you set in config.php):

$ sudo mkdir /var/lib/maharadata/main_behat

5. Make the directory and any subdirectories writeable by Mahara (check the directory is correct):

$ sudo chmod 777 -R /var/lib/maharadata/main_behat

6. Change the directory and any subdirectories permissions to be owned by apache user (check the directory is correct):

$ sudo chown -R www-data:www-data /var/lib/maharadata/main_behat
  • For Ubuntu, apache runs with user www-data
  • For Centos, apache runs with user apache

7. Run Behat tests (change into your Mahara code directory first) as the apache user:

$ cd
$ cd code/mahara
./test/behat/mahara_behat.sh run

Or if you have sudo access:

$ cd
$ cd code/mahara
sudo -u www-data ./test/behat/mahara_behat.sh run


For the first time of running Behat, you need to wait for the Behat environment initialisation. This can take a while.

To run all tests:

./test/behat/mahara_behat.sh run

To run your specific tests marked with @yourtags:

./test/behat/mahara_behat.sh run @yourtags

To run a particular feature file:

./test/behat/mahara_behat.sh run my_file.feature

The run / runheadless / rundebug / rundebugheadless / runfresh are interchangable with run in above commands

Running Behat tests with html report and screenshots on failed steps

To run tests with html output, add the flag 'html' to your test run command, e.g:

./test/behat/mahara_behat.sh run create_page.feature html

This will automatically open an html report of the test run in your browser. If there were failed steps, the the html report plugin takes a screenshot of the page that failed. You can find the screenshots in your behat dataroot (usually /var/lib/maharadata/main_behat) at the following path: behat/html_results/<feature title>/<scenario title>.png

Ubuntu only (you need the image viewer 'eog'): If you set

$cfg->behat_view_screenshots = true;

in your config.php file then the images will be opened up in image browser.

Hopefully we will rig up the report to link to the screenshot soon.

How to Run Mahara behat test on Chrome for versions older than 17.04

Note: Mahara behat is running on chrome driver by default in 17:04+

This is steps for older versions of Mahara

1. Download chromedriver here http://www.seleniumhq.org/download/ ( download the latest release)

2. Start selenium Server with chrome driver

$ java -jar selenium-server-standalone-2.53.1.jar -Dwebdriver.chrome.driver=path of chromedriver

3. Change the behat.yml file as follows,

Here is the file path var/lib/maharadata/main_behat/behat.yml

when you open the beaht.yml file replace the following code with the lines that contain sessions to go

javascript_session: selenium2

        selenium2:
          browser: chrome
           goutte: ~

4. Run the behat test without rundebug

for example ./test/behat/mahara_behat.sh run example.feature

Debugging

Go here for tips: https://wiki.mahara.org/wiki/Testing/Behat_Testing/Error_%26_Solutions